The PurePro Advantage boiler price typically ranges from $1,500-$4,500 for the unit and $3,500-$12,000 installed depending on capacity, venting, and labor. Buyers pay most for larger MBH ratings, sealed combustion venting, and any required piping or control upgrades within the first 100 words.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Unit Only (residential) | $1,500 | $2,800 | $4,500 | Assumptions: 80-120 MBH, standard controls. |
| Installed (typical house) | $3,500 | $7,500 | $12,000 | Includes labor, basic venting, and minimal pipework. |
| Conversion or complex install | $6,000 | $9,500 | $16,000 | Assumptions: replacement of cast-iron radiators, chimney liner, or new combustion air. |
Typical Total Price And Per-Unit Estimates For A PurePro Advantage Boiler
Unit pricing for a PurePro Advantage boiler usually depends on output: small residential units (~50-80 MBH) cost $1,500-$2,200, mid-size (80-120 MBH) cost $2,400-$3,500, and high-output residential/light-commercial models (120-180 MBH) cost $3,800-$4,500.
Installed totals for an average single-family home most commonly fall between $3,500 and $9,000. Assumptions: typical gas line, existing venting or direct-vent conversion, normal access.
Breaking Down A Quote: Materials, Labor, Equipment, Permits, Delivery/Disposal
A homeowner should expect a contractor quote to split into discrete line items so comparisons are meaningful.
Typical contractor quotes include distinct charges for materials, labor, specialty equipment, and disposal rather than a single lump sum.
| Cost Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (boiler, controls) | $1,500 | $2,800 | $4,500 | Boiler model, controls, valves, flanges included. |
| Labor | $800 | $2,400 | $5,000 | Typical rates $75-$125 per hour. |
| Equipment Rental (lift, flue tools) | $50 | $250 | $800 | Depends on access and crane/home-lift needs. |
| Permits & Inspections | $75 | $250 | $700 | Local permit fees and inspection charges vary widely. |
| Delivery/Disposal | $100 | $300 | $1,200 | Old boiler removal, hazardous disposal, chimney liner work. |
How Boiler Size, Efficiency Rating, And Venting Affect Final Price
Boiler output and features change costs quickly: units under 80 MBH are cheapest, 80-120 MBH mid-range, and >120 MBH often require heavier piping and higher labor.
Expect price jumps of about 20%-60% when moving from an 80-100 MBH unit to a 120-150 MBH unit due to larger heat exchangers and increased labor.
Venting matters: converting from natural draft chimney to direct-vent or power-vent can add $500-$3,000 depending on chase length; stainless chimney liners cost $600-$2,000. Higher AFUE or modulating-condensing controls add $300-$1,200.
Practical Ways To Reduce The PurePro Advantage Boiler Price
Control scope: replace just the failing component instead of full system swap when feasible, defer optional smart controls, and accept standard flue options if safe and permitted.
Bundling work (pipe, thermostat, and boiler) with one contractor often saves 10%-20% compared to separate contractors.
Other cost-reduction strategies include scheduling during off-season, prepping access points yourself, getting at least three itemized quotes, and reusing existing piping or controls when code allows.
How Region And Setting Change Installed Pricing Across The U.S.
Labor and permit variations cause regional differences: urban Northeast and West Coast prices typically run 10%-30% above the national average; Midwest and South can be 5%-20% below average.
Rough regional multipliers: Northeast +20%, West Coast +25%, Midwest -10%, South -5% compared to the national average installed price.
Rural installs sometimes cost more per hour due to travel minimums but may have lower permit fees than cities.
Installation Time, Crew Size, And Typical Hourly Rates To Budget
Typical labor time ranges from 6-30 hours depending on scope: straight swap in a utility room 6-12 hours; chimney liner or piping rework 16-30 hours; complex conversions 30+ hours.
Budget labor rates of $75-$125 per hour and crew sizes of 1-3 technicians for most residential jobs.
Example timings: 1 tech × 8 hours for a drop-in replacement; 2 techs × 16 hours for venting and pipe rework; specialized crews add time and higher hourly rates.
Common Add-Ons, Removal Fees, Warranty Options, And Pre-Install Tests
Add-ons that increase price include combustion testing ($100-$250), water treatment and flushing ($150-$600), backflow or expansion tank upgrades ($150-$600), and extended warranties ($200-$800).
Old-boiler disposal or asbestos-safe removal can add $200-$1,500 depending on containment and hazardous material handling.
Buyers should ask for an itemized warranty and note whether parts, labor, and travel are included for the first year; extended labor coverage is a common extra-cost option.