The NTI FTVN 150 price varies by unit configuration and whether the buyer installs it DIY or hires a contractor; typical totals include the boiler, venting, controls, and labor. Buyers usually pay $4,500-$9,500 for the unit plus $2,000-$6,500 for installation depending on venting, fuel hookups, and regional labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Unit Only | $3,800 | $5,500 | $7,200 | Assumptions: standard FTVN 150 single-module, no factory options. |
| Installed (typical) | $6,500 | $10,000 | $13,700 | Assumptions: residential, 150 MBH output, new venting, standard controls. |
| Venting & Controls | $600 | $1,600 | $3,000 | Assumptions: 0-35 ft vent run, standard PVC/SS or power vent kit. |
| Removal/Disposal | $200 | $600 | $1,200 | Assumptions: single old boiler, easy access. |
Typical Purchase And Installed Cost For An NTI FTVN 150
Expect a typical total installed price of about $6,500-$10,000 for a complete replacement in an average U.S. home. The standalone NTI FTVN 150 unit usually costs $3,800-$7,200 depending on options and dealer pricing. Installed totals assume a 150 MBH job, standard near-boiler piping, average accessibility, and common residential codes.
Breakdown Of Materials, Labor, Equipment, And Permits
The main cost centers are the boiler itself, labor, venting materials, and control accessories.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $3,800-$7,200 (unit, gaskets, controls) | $1,200-$4,000 () | $600-$2,000 (vent kits, pumps, expansions) | $50-$400 (local fees) | $200-$1,200 (old unit removal) |
How Capacity, Vent Run Length, And Fuel Connection Change The Price
Longer vent runs, higher firing rates, and switching fuel sources drive the largest price jumps. Examples: a vent run over 25 ft or through multiple roof penetrations adds $400-$1,500; moving from a natural-gas stub to new line or upgrading to stainless concentric venting adds $500-$2,200; increased setup for higher system pressure or multi-boiler controls can add $800-$3,000.
Labor Time, Crew Size, And Typical Job Duration
A typical replacement takes 10-18 hours of labor from a 1-2 person crew for residential installs. Expect $75-$125 per hour per tech depending on region. Smaller jobs with plug-and-play venting can fit into a single day; complex repipes, boiler room upgrades, or specialty venting may require 2-4 days and higher hourly totals.
Three Real-World Quote Examples With Specs And Totals
Sample quotes clarify how specs map to price.
| Scenario | Specs | Labor Hours | Total |
|---|---|---|---|
| Basic Replacement | FTVN 150 unit, short PVC vent, simple hookup | 10 hrs | $6,500 ($3,800 unit + $2,500 install) |
| Mid-Range Upgrade | FTVN 150, stainless vent 25 ft, upgraded controls, pump | 16 hrs | $9,800 ($5,500 unit + $4,300 install) |
| Complex Retrofit | FTVN 150, new gas line, stainless through-roof vent, boiler room piping | 30 hrs | $13,700 ($7,200 unit + $6,500 install) |
Which Site Conditions Trigger Extra Charges
Tight basement access, multi-story rigging, and code-required secondary containment are common surcharge triggers. Numeric thresholds: stair carry or crane required for units over 250 lb adds $400-$1,200; concealed asbestos or oil tank removal adds $500-$3,000; remote location beyond 25 miles from dealer may add delivery fees of $75-$250.
Practical Ways To Reduce NTI FTVN 150 Purchase And Installation Price
Controlling scope and timing yields the clearest savings. Specific tactics: keep existing venting if code allows ($400-$1,500 saved), schedule work in shoulder seasons to avoid peak contractor rates (10%-25% lower), obtain 3 written bids, and supply basic materials like non-specialty fittings to reduce markup. Avoid unnecessary oversized pumps or premium control packages unless required.
Common Add-Ons, Maintenance Costs, And Warranty Options To Budget
Factor in routine maintenance and optional warranties to compare true ownership cost. Common add-ons: extended warranty $200-$900, water treatment $150-$600, annual service $150-$350. Budget $300-$700 for initial boiler room piping upgrades and $75-$200 per year for typical preventative maintenance.