The Carrier Infinity 17 price varies by unit size, installation complexity, and region; most buyers pay between a budget and premium total depending on tonnage and required upgrades. This article lists realistic price ranges, per-ton rates, installation assumptions, and major cost drivers to help plan a purchase or compare quotes for a Carrier Infinity 17 central air conditioner.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Carrier Infinity 17 Unit Only (2–5 ton) | $1,400 (2 ton) | $2,200 (3.5 ton) | $3,500 (5 ton) | Assumptions: standard efficiency 17 SEER, condenser only, no accessories. |
| Installed (Whole Job) | $4,000 | $6,800 | $11,000 | Assumptions: typical single-family home, straight swap, moderate ductwork. |
| Per Ton Installed | $1,500 per ton | $1,900 per ton | $2,200 per ton | Assumptions: includes labor, refrigerant, basic controls. |
Real Installed Price For Carrier Infinity 17 By Home Size
Typical installed prices depend mostly on tonnage and swap difficulty. Smaller homes needing 2–2.5 tons generally land near $4,000-$5,500 installed, medium homes (3–3.5 tons) $5,500-$8,000, and larger homes (4–5 tons) $7,500-$11,000. Assumptions: midwestern labor, 1-2 installers, 3–6 hours on site for condenser swap plus indoor coil work.
Breakdown Of The Main Quote Components
Unit, labor, and any ductwork or coil replacement make up most of the final invoice.
| Materials | Labor | Equipment | Delivery/Disposal | Taxes |
|---|---|---|---|---|
| $1,400-$3,500 (unit); $150-$600 (coils/filters) | $900-$2,800 () | $50-$300 (lift/rental) | $50-$300 | $100-$600 |
Which Variables Change The Carrier Infinity 17 Quote Most
Three variables shift price significantly: tonnage, indoor coil replacement, and duct modification. Examples: increasing from 3 to 4 tons adds about $1,200-$2,000; replacing the evaporator coil adds $400-$1,200; extensive duct repairs add $1,000-$4,000. Assumptions: pricing scales based on labor hours and material grade.
How Installation Time And Crew Size Affect Price
Longer job times and larger crews raise labor and access charges.A straight condenser swap: 3–6 hours with 2 installers ($75-$125 per hour) totaling $450-$1,500 labor. A full system change (condenser, coil, controls): 8–16 hours with 2–3 crew members, $1,200-$4,800 labor. Assumptions: typical contractor hourly rates in suburban markets.
Common Add-Ons And Their Typical Prices
Expect extra charges for upgraded thermostats, refrigerant, and electrical work.Smart thermostat: $150-$400 (unit) + $75-$200 install. Electrical service upgrade or new 240V circuit: $400-$1,200. Additional refrigerant for retrofit: $75-$350. Assumptions: prices exclude major panel upgrades or high-voltage rewiring.
Three Practical Ways To Lower Carrier Infinity 17 Price
Control scope: replace only what’s necessary and avoid bundled premium upgrades you don’t need.Get three written quotes, schedule installation in shoulder seasons (spring/fall) to avoid peak rates, and keep existing compatible components (coils, thermostats) when feasible. Assumptions: homeowner can provide clear attic access and remove obstacles to speed install.
Regional Price Differences And What To Expect In The U.S.
Prices vary roughly 10%-30% between low-cost and high-cost regions.Typical deltas: Northeast/West Coast +15%-30% vs. Midwest and South; rural areas sometimes +5%-10% for travel and minimum charges. Example: a $7,000 average job in the Midwest may be $8,200-$9,100 on the coasts. Assumptions: normalized for typical contractor overhead and permit rules.
Three Real-World Quote Examples With Specs
Concrete quotes show how specs change totals.
| Example | Specs | Labor Hrs | Unit/Parts | Total |
|---|---|---|---|---|
| Budget Swap | 2 ton condenser, reuse coil, straight swap | 3 | $1,400 | $4,000 |
| Standard Replacement | 3.5 ton condenser + coil, new thermostat | 10 | $2,200 | $6,800 |
| Full System Upgrade | 5 ton, new coil, duct repairs, panel circuit | 16 | $3,500 | $11,000 |
Questions That Will Change Your Quote When You Call Contractors
Prepare to answer home square footage, current system tonnage, duct condition, and whether the coil will be reused.Also ask contractors to itemize unit, labor, permits, and any expected electrical work so quotes are comparable. Assumptions: having utility bill and model number available speeds accurate bids.