The Buderus Logano G115 price depends on the unit cost plus installation, venting, and fuel hookup work; most U.S. homeowners pay between $6,000 and $14,000 total. This article breaks down typical price ranges, per-unit rates, and the main drivers that change the final cost for a Buderus Logano G115 boiler.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Boiler Unit | $3,000 | $4,500 | $7,000 | Single-boiler price, new G115 model, excludes controls |
| Complete Install | $6,000 | $9,500 | $14,000 | Includes labor, venting, gas/oil hookup, basic controls |
| Venting/Chimney Work | $500 | $1,500 | $4,000 | Depends on liner vs. direct vent vs. chimney rebuild |
| Conversion/Controls | $300 | $900 | $2,500 | Outdoor reset, smart controls, or oil-to-gas conversion |
Typical Total Price For A Buderus Logano G115 Installation
Most homeowners buying and installing a Buderus Logano G115 should budget $6,000-$14,000 total; the average installed job is about $9,500. This range assumes a single-family home, standard chimney or PVC direct venting, and 80-120 MBH output sized to a 1,000-2,000 sq ft home.
Assumptions: Midwest labor rates, standard materials, normal access.
Breakdown Of Materials, Labor, Equipment And Permits
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $3,000-$7,000 (boiler, controls, piping) | $1,200-$4,000 () | $200-$1,200 (vent liner, pumps, flue parts) | $50-$500 (local mechanical permit) | $100-$600 (old boiler disposal) |
Materials are typically the single largest line item, but labor and venting can push an install into the high range.
How Boiler Size, Chimney Type, And Fuel Hookup Change Quotes
Quoted prices change sharply with input rate, venting, and fuel work: 80 MBH vs 150 MBH units can differ by $800-$1,500 in unit cost and 2-6 labor hours. Installing a higher-input G115 for a larger home or a switch from oil to natural gas can add $1,500-$5,000 depending on line distance and conversion parts.
Numeric examples: adding a chimney liner typically costs $800-$2,500; gas-line runs over 20 linear feet often add $300-$1,200; oil-to-gas conversion or new gas meter can add $1,500-$4,000.
Ways To Lower Buderus G115 Installation Price
Homeowners can reduce cost by retaining existing compatible piping, scheduling installations in shoulder seasons, and choosing factory-basic controls instead of premium add-ons. Removing the old boiler yourself and providing clear access can save $100-$500 in disposal and labor time.
Other tactics: get 3 competitive quotes, avoid emergency/rush installs, accept standard warranty terms, and bundle with other plumbing or HVAC work to reduce markup.
Cost Differences Across U.S. Regions and Climate Zones
Regionally, expect 10%-30% higher total installed prices in coastal urban areas versus the Midwest. An installed G115 averaging $9,500 in the Midwest often costs $11,000-$12,500 in the Northeast and $10,500-$13,000 on the West Coast.
Cold-climate installers may charge more for larger units or extra controls; expect a 5%-12% premium in Northern states for higher-capacity units and robust freezing protection.
Common Add-Ons, Removal, And Diagnostic Fees To Expect
| Item | Typical Price Range | When It Applies |
|---|---|---|
| Chimney liner | $800-$2,500 | Old masonry flues or damaged liners |
| New circulator pump | $250-$700 | Failed pump or upsizing for hydronic zones |
| System flush | $300-$900 | Corrosion or old system debris |
| Diagnostic / service call | $75-$200 | Pre-install inspection or troubleshooting |
Budget for add-ons separately rather than assuming all work is included in the base install quote.
Three Real-World Quote Examples With Specs
| Job | Specs | Labor Hours | Price |
|---|---|---|---|
| Small home replacement | G115 80 MBH, reuse pipe, PVC direct vent | 8-12 hours | $6,000-$8,000 |
| Mid-size install with liner | G115 100 MBH, chimney liner, new pump | 14-20 hours | $9,000-$12,000 |
| Conversion & high-capacity | G115 150 MBH, gas-line 30 ft, oil-to-gas work | 20-30 hours | $12,000-$16,000 |
These examples illustrate how size, venting, and fuel conversion drive labor and total price.