The Carrier Infinity 19VS price varies by system size, installation complexity, and region; buyers typically pay between $5,000 and $12,000 for a full replacement. Assumptions: single-family home, 2.5–3.5 ton unit, mid-range installation, U.S. urban/suburban market.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Equipment Only | $2,800 | $4,200 | $6,500 | Per unit, includes condenser and coil |
| Installed System | $5,000 | $8,500 | $12,000 | Includes labor, basic refrigerant, disposal |
| Per Ton (Equipment) | $900 | $1,400 | $2,200 | 1.5–5 ton range |
| Service/Repair Visit | $120 | $180 | $300 | Diagnosis and minor repair |
Installed Price For A Typical 2.5–3.5 Ton Carrier Infinity 19VS Unit
Most homeowners pay $6,500-$9,500 installed for a 2.5–3.5 ton Infinity 19VS with standard ductwork and one-zone setup.
Equipment-only for this size: $3,200-$4,800. Typical labor: $1,800-$3,200 depending on local rates and crew hours. Additional charges may include refrigerant add-on ($150-$450), thermostat upgrade ($200-$600), and disposal fee ($50-$200).
Assumptions: suburban installation, permit not required beyond standard HVAC permit, existing compatible indoor coil and ductwork.
Breakdown Of The Quote: Materials, Labor, Equipment, Permits
A typical installer quote divides costs into equipment, labor, permits, and delivery/disposal—expect equipment to be 40–55% of the installed price.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $400-$1,200 (line sets, fittings) | $1,200-$3,200 () | $2,800-$6,500 (condenser, coil) | $50-$600 | $50-$300 |
How Tonnage, SEER/HSRP Rating, And Duct Condition Change The Final Price
Tonnage and efficiency are primary drivers; increasing from 2.5 to 4 tons typically adds $1,200-$2,500 to equipment cost.
Two specific thresholds: choosing 1.5–2.5 ton units versus 3–5 ton units changes per-ton equipment cost from about $900-$1,400 up to $1,300-$2,200. Upgrading to factory-installed variable-speed blower or higher SEER components can add $600-$1,800.
Poor ducts requiring sealing or replacement add $1,000-$5,000 depending on scope; long refrigerant runs over 50 ft may add $300-$1,200 for additional line set and labor.
Practical Ways To Reduce Carrier Infinity 19VS Pricing On Replacement Jobs
Scope control saves most: keep existing compatible indoor coil and ducts, and avoid optional comfort accessories to lower installed cost by 15–30%.
Specific tactics: schedule in shoulder season (spring/fall) to reduce rush premiums, get three competitive quotes, accept manufacturer basic warranty instead of extended plans if budget-constrained, and confirm existing line set length to avoid paying for extra materials.
Regional Price Differences: Urban, Suburban, And Rural Comparisons
Expect 10–25% higher installed prices in high-cost coastal metro areas and 5–15% lower prices in rural or low-cost inland regions.
Example deltas: Northeast/West Coast urban installers often charge $9,000-$12,000 installed for a 3-ton Infinity 19VS, while Midwest and parts of the South often see $6,500-$9,000 for equivalent work. Labor rates drive most of the variance.
Extra Costs: Add-Ons, Retrofits, Disposal, And Permits
Budget for common extras: new thermostat $200-$600, duct sealing $300-$1,200, coil replacement $600-$1,800, and permit fees $50-$600.
Other possible charges: surge protection or electrical upgrades $400-$2,000, refrigerant conversion or reclaim fees $150-$500, and accelerated scheduling or emergency weekend installs at premium rates 1.5×–2× normal labor.
Three Real-World Quote Examples With Specs And Labor Hours
Sample 1: Basic swap, suburban home: total $6,200.
| Spec | Unit | Labor Hours | Total |
|---|---|---|---|
| 3 ton Infinity 19VS | Equipment $3,500 | 10–14 hrs | $6,200 (includes materials, disposal) |
Sample 2: Mid-range with thermostat and minor duct sealing: total $8,700.
| Spec | Unit | Labor Hours | Total |
|---|---|---|---|
| 3.5 ton Infinity 19VS | Equipment $4,600 | 14–20 hrs | $8,700 (adds $500 thermostat, $800 duct) |
Sample 3: High-end install with coil change and electrical upgrade: total $12,100.
| Spec | Unit | Labor Hours | Total |
|---|---|---|---|
| 4 ton Infinity 19VS | Equipment $6,000 | 18–26 hrs | $12,100 (adds $1,200 coil, $1,800 electrical) |