The NTI FTVN 110 price and installed cost vary widely depending on equipment options, energy source, and contractor labor. Buyers typically pay $7,500-$18,000 for the unit plus $3,000-$12,000 to install, with total project costs driven by hydronic piping, controls, and venting needs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| FTVN 110 Boiler Unit | $6,000 | $9,500 | $13,500 | Assumptions: new condensing gas-fired model, standard controls, no optional accessories. |
| Installation (labor & materials) | $3,000 | $7,000 | $12,000 | Assumptions: accessible boiler room, existing hydronic system, local labor rates. |
| Total Installed Price | $9,000 | $16,500 | $25,500 | Assumptions: single-unit residential/light commercial job, gas hookup present. |
Typical Purchase Price and What That Includes
The NTI FTVN 110 unit alone usually costs $6,000-$13,500 depending on factory options such as integrated controls, pump packages, and stainless heat-exchanger upgrades.
Expect an average list price around $9,500 for a base FTVN 110 with standard control board and warranty. Assumptions: U.S. dealer pricing, freight included to commercial address.
Breakdown Of Major Quote Line Items
This table shows the common cost components contractors include on quotes for an FTVN 110 replacement or new install.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $4,000-$9,000 | $2,500-$8,000 | $400-$2,000 | $50-$700 | $150-$800 |
Materials and labor dominate the quote; materials include the boiler, controls, pipe, valves, and venting.
How Site Conditions And System Scope Affect The Final Price
Access, number of hydronic zones, and whether the job is replacement versus new installation strongly change the price.
Typical variables: number of zones (1-3 zones: add $0-$2,000; 4-8 zones: add $2,000-$6,000), and required venting conversion (sidewall venting add $800-$2,500; chimney liner add $1,200-$4,000).
Two Niche Drivers That Can Double Or Cut Costs
Fuel conversion and duty sizing are niche-specific drivers with clear numeric thresholds that affect pricing.
- High-altitude or commercial derating: Systems above 3,000 ft or requiring >110 MBH effective output may need derated models or parallel units; add $1,500-$6,000 for additional equipment.
- Multi-boiler or lead-lag systems: If required capacity exceeds 110 MBH, a two-unit setup costs roughly 1.7× a single unit (two units $12,000-$27,000 plus controls $1,000-$4,000).
Practical Ways To Lower The NTI FTVN 110 Installed Price
Controlling scope, timing, and material choices reduce total expense without sacrificing safety or code compliance.
- Retain existing pumps and controls if compatible: saves $800-$3,000 compared with full replacement.
- Schedule work in shoulder seasons (spring/fall): contractors often offer lower labor rates and faster lead times than peak winter months, potentially reducing labor cost by 10%-20%.
- Bundle with related trades: combining plumbing and HVAC work with the same contractor can reduce overhead and coordination fees by $300-$1,200.
Regional Price Differences Across the U.S.
Prices vary by region; expect higher installed costs in the Northeast and West Coast versus the Midwest and South.
| Region | Installed Low | Installed Avg | Installed High |
|---|---|---|---|
| Northeast | $10,500 | $18,000 | $27,500 |
| Midwest | $9,000 | $15,500 | $23,000 |
| South | $8,500 | $14,500 | $22,000 |
| West Coast | $11,000 | $19,000 | $28,000 |
Expect a 10%-30% premium in high-cost labor markets like NYC, Boston, San Francisco, and parts of the Pacific Northwest.
Common Add-Ons, Labor Time, And Job Duration
Typical install time and add-on fees influence total cost and scheduling.
| Item | Time | Price Range |
|---|---|---|
| Standard replacement | 8-16 hours | $3,000-$8,000 |
| Full system retrofit (zones, new pumps) | 2-4 days | $7,000-$15,000 |
| Venting upgrade or chimney liner | 4-10 hours | $800-$4,000 |
Contractors typically quote 1-3 technicians; hourly shop/tech rates run $75-$150 per hour depending on market.