The Ruud Econet Ultra Series UA20 price varies by unit size, installation complexity, and region; most buyers pay between $2,000 and $6,500 total for a like-for-like replacement. This article lists typical equipment and installed price ranges, per-ton and per-hour assumptions, and the main variables that change the final cost for a Ruud UA20 purchase or replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Equipment Only (per ton) | $900 | $1,500 | $2,400 | Assumptions: standard single-stage condenser, no rebate. |
| Installed (2-Ton typical) | $2,000 | $4,200 | $7,500 | Assumptions: Midwest labor, 10-30 ft line set, matched coil. |
| Line Set & Refrigerant | $200 | $600 | $1,200 | Assumptions: adds per 10–30 ft run. |
| Permit + Disposal | $75 | $300 | $800 | Assumptions: local codes, disposal fees. |
What Buyers Pay For a Ruud UA20 Condenser Or Packaged Unit
The typical Ruud Econet Ultra UA20 price for equipment alone is $900-$2,400 per ton, while installed replacement for a common 2-ton unit runs $2,000-$7,500 depending on scope. Expect an average installed price of about $3,500-$4,500 for a matched 2–2.5 ton UA20 job in a suburban U.S. market.
Assumptions: matched indoor coil or air handler, standard 10–30 ft line set, no major ductwork, average accessibility.
Breakdown Of Typical Quote Line Items And Their Prices
Major quote items include equipment, labor, materials (line set, refrigerant), permits, and disposal; each line can swing the final price considerably. Reviewing each line item helps compare competing quotes and avoid surprises.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $200-$1,200 (line sets, fittings, refrigerant) | $600-$2,000 (8-24 hours, $75-$125 per hour) | $900-$2,400 per ton | $75-$300 | $50-$500 |
How Unit Capacity, SEER, And Matching Coil Affect Price
Capacity and efficiency change both equipment and labor costs: 1.5–2 ton units cost less than 3–5 ton systems, and higher SEER models cost more. Example thresholds: moving from 2.5 to 3.5 tons typically adds $700-$1,500; upgrading from 14 SEER to 16+ SEER adds $300-$1,200.
Assumptions: price deltas assume the same installation complexity and compatible indoor unit.
Site Conditions That Drive Extra Charges
Tight access, long refrigerant runs, or the need for a crane can add substantial costs: long runs, permits, and difficult rooftops are common add-ons. Numeric triggers: runs >50 ft add $300-$1,200; rooftop crane lifts add $500-$2,000; electrical upgrades (breaker/panel) add $400-$1,800.
Assumptions: urban or multi-story installations with limited ground access.
Practical Ways To Lower Ruud UA20 Installation Price
Buyers can reduce the Ruud Econet Ultra UA20 price by keeping scope small, scheduling off-season installs, and avoiding unnecessary upgrades. Cost-saving moves include reusing an existing compatible coil ($0-$600 saved), shortening line runs, and bundling work (replace both condenser and coil together reduces total labor).
Assumptions: existing indoor equipment is in good condition and compatible with UA20 refrigerant type.
How Regional Labor And Market Differences Change Quotes
Labor and permit costs vary by region: coastal urban areas run higher than rural Midwest markets. Typical regional deltas: Northeast/West Coast +15% to +35% vs. Midwest; rural areas -10% to -20%.
| Region | Installed 2-Ton Range | Typical Labor Rate |
|---|---|---|
| Midwest | $2,000-$4,000 | $75-$100 per hour |
| Northeast / West Coast | $3,000-$6,500 | $90-$140 per hour |
| Rural/Southern | $1,800-$3,800 | $65-$95 per hour |
Common Add-Ons, Example Quotes, And What To Expect
Add-ons often include thermostat upgrades, refrigerant recovery, electrical work, and extended warranties; these change the final Ruud UA20 price. Typical add-on ranges: thermostat $120-$450, retrofit refrigerant conversion $400-$1,200, electrical service upgrade $400-$1,800.
| Example Job | Specs | Labor Hours | Total Price |
|---|---|---|---|
| Basic Replace | 2-ton UA20, matched coil, 20 ft line set | 8-12 hours | $2,200-$3,800 |
| Moderate Upgrade | 3-ton UA20, new thermostat, 40 ft run | 12-18 hours | $4,000-$6,200 |
| Complex Rooftop | 3.5-ton UA20, crane, electrical panel work | 18-30 hours | $6,000-$10,500 |