Whirlpool split AC price varies with capacity, installation complexity, and efficiency; buyers commonly pay from $750 to $4,500 total. This article lists typical unit prices, installation charges, and the main drivers that change final pricing for Whirlpool wall‑mounted split systems.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 9,000–12,000 BTU Unit (0.75–1.0 ton) | $400 | $650 | $1,200 | Basic inverter models |
| 18,000–24,000 BTU Unit (1.5–2.0 ton) | $900 | $1,600 | $2,500 | Mid/High‑efficiency models |
| Installation (standard) | $350 | $850 | $1,800 | Includes line set, bracket, 10–20 ft run |
| Full System (unit + install) | $750 | $2,450 | $4,500 | Depends on tonnage and complexity |
Typical Total Price For A Single‑Room Whirlpool Split AC
Replacement or new installations for a single room with a Whirlpool split AC usually cost between $750 and $2,200 for common sizes (9,000–18,000 BTU). A 12,000 BTU Whirlpool inverter split typically sells for $500-$900 and installs for an additional $400-$1,000 in most U.S. markets. Assumptions: suburban installer, 12–16 ft outdoor to indoor line length, standard electrical.
Breakdown Of Unit, Labor, Equipment, And Disposal Charges
Buyers should expect separate line items for the outdoor compressor, indoor head, labor, and materials; permits or electrical upgrades are extra. Common quote components include materials, labor, equipment, and disposal fees listed below with typical ranges.
| Materials | Labor | Equipment | Delivery/Disposal |
|---|---|---|---|
| $400-$2,500 (unit price by BTU/SEER) | $350-$1,200 () | $75-$350 (brackets, line sets, mounts) | $50-$250 (old unit removal) |
How Capacity And SEER Rating Change The Final Quote
Unit capacity (BTU/ton) and SEER/IEER efficiency are primary cost levers. Lower capacities like 9,000–12,000 BTU cost $400-$1,200; larger 18,000–24,000 BTU units cost $900-$2,500; upgrading from 14 SEER to 18+ SEER often adds $300-$900.
Site Conditions That Drive Up Installation Price
Long refrigerant line runs, tall exterior mounting, or difficult access raise labor and parts costs. If the line set exceeds 25 ft or requires wall chase/core drilling, add $200-$800; runs over 50 ft can add $600-$1,500. Assumptions: concrete wall vs. vinyl siding, single‑story vs. multi‑story access.
Practical Ways To Lower Whirlpool Split AC Price
Buyers can control scope and timing to reduce expense: choose slightly lower SEER, accept shorter factory line set lengths, or schedule off‑peak installation. Opting for a standard 14–16 SEER unit instead of premium 18+ can save $300-$900 on the unit alone.
Regional Price Variations Across the U.S.
Prices vary by region: coastal urban areas and high‑demand southern markets are pricier. Expect installers in the Northeast and West Coast to charge ~10–25% more; the South and Midwest often charge 0–15% less on average. Example delta: $850 average install in Midwest vs. $1,050 in West Coast (~24% higher).
Installation Time, Crew Size, And Typical Labor Rates
Installation time depends on complexity; a standard split takes 2–6 hours, while complex jobs take 6–12 hours. Most jobs use a 1–2 person crew with labor rates of $75-$125 per hour; expect 3–8 labor hours for typical installs. Assumptions: one indoor head, single outdoor condensing unit, normal access.
Common Add‑Ons, Permit Fees, And Removal Costs To Budget
Permits, electrical upgrades, and disposal create predictable extra charges. Budget $50-$300 for permits, $150-$800 for electrical upgrades (new circuit/disconnect), and $50-$250 for old unit haul‑away.
Three Realistic Quote Examples With Specs And Pricing
Example 1: 12,000 BTU Whirlpool inverter, standard install, 12 ft run — $500 unit + $450 install = $950 total. Example 2: 18,000 BTU unit, moderate run (30 ft), small electrical upgrade — $1,400 unit + $1,050 install = $2,450 total.
Example 3: 24,000 BTU high‑SEER system, multi‑story mount, 55 ft run — $2,300 unit + $1,900 install + $200 permit = $4,400 total. Assumptions for examples: licensed HVAC contractor, refrigerant charged to industry spec.